EasyManuals Logo

LG G Flex 2 User Manual

LG G Flex 2
159 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #139 background imageLoading...
Page #139 background image
Settings 131
Swipe: Swipe any part of the screen to unlock the screen.
Knock Code: The Knock Code feature allows you to create your own unlock code using a
combination of knocks on the screen. You can access the Home screen directly when the
screen is off by tapping the same sequence on the screen.
Pattern: Opens a set of screens that guide you through drawing a screen unlock pattern. It's
recommended that you enter backup PIN as well in case that you might lost the pattern. Then,
you can set vibrate on touch or whether to make the pattern visible.
PIN: Enter a numeric PIN to unlock screen.
Password: Enter a password to unlock screen.
From then on, any time you wish to turn the phone on or unlock the screen, you must draw your unlock
pattern or enter the PIN or password to unlock the screen.
Note: You have five opportunities to enter your unlock Pattern, PIN or Password. If you've entered wrong
information five times in a row, you must wait 30 seconds before you can attempt again.
Note: When using Knock Code, failing to enter the correct sequence 5 times will display an outlined grid
box to allow you precise entry. If you fail 1 more time, the backup PIN or Google account sign-in is
required.
If you„ve set up a Google Account on the phone, tap the Forgot pattern? button. You will be able
to unlock the phone with your Google Account username and password or entering you Backup
PIN.
If you haven„t created a Google Account on the phone, you must perform a factory reset.
CAUTION! If you perform a factory reset, all user applications and user data will be deleted. Please
remember to back up any important data before performing a factory reset.
When you can„t recall your screen lock:
1. Turn the phone off.
2. Press and hold the following keys at the same time: Volume Up Button + Power/Lock
Button on the back of the phone.
3. Release only the Power/Lock Button when the boot logo is displayed, then immediately
press and hold the Power/Lock Button again.
4. Release all keys when the Factory hard reset screen is displayed.
5. Press the Volume Buttons to highlight Yes, then press the Power/Lock Button to
continue.
6. Press the Volume Buttons to highlight Yes once more, then press the Power/Lock
Button to confirm.

Table of Contents

Other manuals for LG G Flex 2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LG G Flex 2 and is the answer not in the manual?

LG G Flex 2 Specifications

General IconGeneral
ProcessorQualcomm Snapdragon 810
CPUOcta-core (4x1.5 GHz Cortex-A53 & 4x2.0 GHz Cortex-A57)
GPUAdreno 430
Front Camera2.1 MP
Dimensions149.1 x 75.3 x 7.1-9.4 mm
Weight152 g
ColorsPlatinum Silver, Flamenco Red
Display5.5 inches, 1080 x 1920 pixels, P-OLED
RAM2 GB
Internal Storage16GB / 32GB
Rear Camera13 MP, laser autofocus, OIS
Battery3000 mAh (non-removable)
Operating SystemAndroid 5.0 Lollipop, upgradable to 6.0 Marshmallow

Related product manuals