LG G Flex 2 User Manual

Settings 135
Help
Allows you to view help information for the available gestures.
Motion Sensor Calibration
Improves the accuracy of the tilt and speed of the sensor.
1. Tap > > Settings .
2. From the DEVICE section, tap Gestures.
3. Tap Motion sensor calibration.
4. Place the phone on a flat surface and tap Calibrate sensor.
One-handed Operation
You can configure various one-handed operation's options.
Dial Keypad
To adjust the position of the dial keypad to the left or right.
1. Tap > > Settings .
2. From the DEVICE section, tap One-handed operation.
3. Tap the Dial keypad checkbox to set this feature on. (A blue checkmark will appear.)
LG Keyboard
To adjust the position of the LG keypad to the left or right.
1. Tap > > Settings .
2. From the DEVICE section, tap One-handed operation.
3. Tap the LG keyboard checkbox to set this feature on. (A blue checkmark will appear.)
Lock Screen
To adjust the position of the PIN entry to the left or right.
1. Tap > > Settings .
2. From the DEVICE section, tap One-handed operation.
3. Tap the Lock screen checkbox to set this feature on. (A blue checkmark will appear.)

LG G Flex 2 Specifications

General

Processor	Qualcomm Snapdragon 810
CPU	Octa-core (4x1.5 GHz Cortex-A53 & 4x2.0 GHz Cortex-A57)
GPU	Adreno 430
Front Camera	2.1 MP
Dimensions	149.1 x 75.3 x 7.1-9.4 mm
Weight	152 g
Colors	Platinum Silver, Flamenco Red
Display	5.5 inches, 1080 x 1920 pixels, P-OLED
RAM	2 GB
Internal Storage	16GB / 32GB
Rear Camera	13 MP, laser autofocus, OIS
Battery	3000 mAh (non-removable)
Operating System	Android 5.0 Lollipop, upgradable to 6.0 Marshmallow