74
ENGLISH
[Auto Volume]
(Q. Settings) [Sound] [Auto Volume]
Click [On] to adjust the volume level automatically.
This feature is available on certain models only.
[AV Sync Adjustment]
(Q. Settings) [Sound] [AV Sync Adjustment]
Adjusts the synchronization of the sound from the speaker that is working.
The closer to (+), the slower the audio output.
If you select the [Bypass], Outputs the sound from external devices without any
audio delay. The audio may be output before the video because of the time the
projector takes to process the video input.
[Sound Test]
(Q. Settings) [Sound] [Sound Test]
Start the [Sound Test] to check that the sound signal output is normal, and then
select whether there is an error.
If there are no problems in the test, check the connected external device.
• Sound test is possible by Internal projector Speaker only.
To Next Page
Loading...
