TWO RECIPES
NOTE : The time variation during cooking of recipe depends upon the ingredients, method adopted & type of food category
Two Recipes for starters
1. ROASTED PAPAD
Procedure :
Papad:
1. Place the raw papad at the centre of
Glass Tray, as shown in the picture
above.
2. Select Micro-100% Power Level and
Cook time. Press START/Add 30 Secs
3. After Papad cooking give standing
time of 30-45 seconds.
To Cook Multiple Papads :
*Place Multiple papads over one another,
as shown in the picture above.
Crispy Papad :
1. Press START/Add 30 Secs once
without papad.
2. Sprinkle little water or oil over the
papad.
3. After beep, place the papad at the
centre and press START/Add 30
Secs.
*Note : The cooking time may vary –
a. As per the composition of the papad
material.
b. As per the Quantity of papad used.
2. POP CORN : Place the pop corn bag to
the glass tray properly as instructed on
packing. Use START/Add 30 Secs to set
3~4 minutes. Remove the bag after
poping sound has stopped. Take care
that bag corners do not touch sides while
rotating.
Note : Attend poping process carefully.
Do not overheat as cause flash fire.
66
To Next Page
Loading...
