LG MultiSITE CRC1 Series - Page 44

44
MultiSITE CRC 1 Controller
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.
CONFIGURATION SCREENS
ZigBee Configuration – continued
Press the right arrow on the ZigBee Configuration screen to display the second page of the ZigBee Configuration
screen. The blue fields indicate the controller is paired with a sensor.
Door installed
Yes
Door status
Closed
Window status
Closed
Win. installed
Yes
Permit join
On
Low bat. alarm
On
2/3 Zigbee Configuration
Door contact
status if installed
Window contact
status if installed
Battery status
of wireless switch
Indicates if the door
contact is installed
Indicates if the window
contact is installed
Parameter Parameter Settings Denition
Permit join Choices: O󰀨, On
Default value = On
Changing this value to "O󰀨" will lockout any new ZigBee
devices from joining the network through this controller.