LG MultiSITE CRC1 Series User Manual

30
MultiSITE CRC 1 Controller
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.
CONFIGURATION SCREENS
General Settings
There are four Installer / General Settings screens. Press General
Settings on the Installer screen to display the first General Settings
screen. Press the right arrow on the screen to display screens 2, 3,
and 4.
0
Enable
0
CC Add. Group(2)
Aut o mode
1/4 Installer / General
CC Add. Unit(2)
This value will be used to
decide if Auto mode appears
in the Operation Mode screen
and whether to show “Auto”
text at the top of the Home
screen during Auto operation
mode.
Parameter Parameter Settings Denition
Central Controller Add.
Group(2
Choices: 0 - F
Default value = 0
Assigns a unique hexadecimal address when used with a central
controller
Central Controller Add.
Unit(2)
Choices: 0 - F
Default value = 0
Assigns a unique hexadecimal address when used with a central
controller
Auto mode Choices: Enable, Disable
Default value = Disable
Enables Auto mode on Home screen. Auto mode is available only
when the IDU is a master unit (function code 8).
Slave(0)
ODU Mode-M/S(47)
2/4 Installer / General
Parameter Parameter Settings Denition
ODU Mode - M/S (47) 0 = “Slave (0)”
1 = “Master (1)”
Default value = Slave (0)
Sets the ODU as a master or slave unit. Outdoor unit controls
are available only when the ODU is congured as master.

LG MultiSITE CRC1 Series Specifications

General

Brand	LG
Model	MultiSITE CRC1 Series
Category	Remote Control
Language	English