LG MultiSITE CRC1 Series User Manual

36
MultiSITE CRC 1 Controller
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.
CONFIGURATION SCREENS
Heat Settings
Press the Heat Settings button on the Installer screen to display the 1/2 Heat Settings screen.
Disable(0)
1/2 Heat Settings
Ext Aux Heat(25)
Aux Heat Ctrl(21)
HP First(0)
Prim Heat Ctrl(36)
Disable(0)
Enable (1)
Emerg Heat (18)
Using the Up and Down arrows select
between Disable, Non-Ducted and
Ducted.
Use this function to enable or
disable auxiliary heat control.
Select between Primary Heat First and
Primary Heat Last.
Parameter Parameter Settings Denition
Ext Aux Heat (25) Choices: 0 = ‘Disable (0)”, 1 = “Non-Duct (0)” , 2 = “Ducted (1)”
Default value = Disabled(0)
Enables use of an external
auxiliary heat kit
Aux Heat Cntrl(21) This control is used to enable related control on MORE screen
that actually turns the Aux Heat on or o󰀨
Choices: 0 = “Disable (0)” , 1 = “Enable (1)”
Default value = Disabled(0)
Enables or disables the
auxiliary heater
Prim Heat Cntrl(36) Choices: HP First (0), HP Last (1)
Default value = HP First(0)
Enables or disables the primary
heater
Emerg Heat (18) Use this function to enable or disable emergency heating.
Choices: 0 = “Disable (0)” , 1 = “Enable (1)”
Default value = Disabled(0)
Allows use of an auxillary
heater when the outdoor unit
is not working properly. Wait 2
seconds after enabling control
to be taken to Heater and Fan
sub-controls.

LG MultiSITE CRC1 Series Specifications

General

Brand	LG
Model	MultiSITE CRC1 Series
Category	Remote Control
Language	English