56
CUSTOMIZING SETTINGS
Item Description
Contrast Increases or decreases the gradient of the video signal.
Bright-
ness
Adjusts the base level of the video signal to make the image brighter or
darker.
Sharp-
ness
Adjusts the level of sharpness in the edge between the light and dark
areas of the picture. The lower the level is, the softer the image looks.
Horizontal and Vertical Sharpness are available only in Expert1/2.
Color Adjusts the intensity of all colors.
Tint Adjusts the balance between red and green levels.
Ad-
vanced
Control
Customizes the advanced settings.
Picture
Option
Sets optional settings.
Picture
Reset
Restores each mode's options to the factory default.
Aspect
Ratio
Resizes the picture.
Screen
(RGB-
PC)
Adjusts the picture quality in RGB-PC input.
Item
Resolution Available
resolutions
are 768 resolution (1024 x 768/
1280 x 768/ 1360 x 768, 60 Hz) and 1050 resolution
(1400 x 1050/ 1680 x 1050, 60 Hz).
Auto Cong. Provides optimized picture quality by automatically calibrat-
ing mismatched horizontal width and shaky picture caused
by conicts between the internal settings of the projector
and various PC graphic signals.
y
You can also use the AUTO button on the remote
control.
Position Moves the image up/down/left/right.
Size Changes the screen size.
Phase Makes the picture look clear by removing horizontal noise.
Reset
Restores all the settings to the factory default.
To Next Page
Loading...
