Select Port (Menu , , )
1 . P r ess Soft Key 1 M e n u .
2 . P r ess , , .
3 . Select an option and press .
USB/RS-232C (COM Port)/Closed
Port Speed (Menu , , )
This setting enables the subscriber terminal to set the
p o r t speed.
1 . P ress Soft Key 1 M e n u.
2 . P ress , , .
3 . Select an option and press .
1 9 2 0 0 / 11 5 2 0 0 / 2 3 0 4 0 0
Po r t Speed needs to be set pro p e rly based on
c a rri e r ’s netwo r k. Contact carrier for the maximu m
ava i l able speed.
NOTE
When using 1X HSPD data service by means of an
RS-232C data cable, port speed shall be set to
115,200 (230,400 shall not be supported). When using
1X HSPD data service by means of USB data cable,
you may get better port speed if the port speed is set
to 230,400 rather than 115,200.
102 Menu Functions
To Next Page
Loading...
