19
General Functions
Vibrating Mode (Quick)
Vibrating Mode can be activated by touching
and holding from the dial pad. You can
also set Vibrating Mode by pressing and
holding down the Volume Down Key as well.
The phone will display ‘Vibrating Mode On’.
If you would like to turn Vibrating mode Off,
touch and hold
again.
Signal Strength
If you are inside a building, being near a
window may give you better reception. You
can see the strength of your signal by the
signal indicator on your phone’s display
screen.
Voicemail
If provided by your network, callers can leave
you messages if they call and you don’t
answer.
To access from the standby screen, touch
, then press and hold down .
Note
Please check with your network service provider
for details of their service in order to configure
the phone accordingly.
Entering Text
You can enter alphanumeric characters by
using the phone’s touch pad. For example,
storing names in the Address Book, writing a
message or scheduling events in the calendar
all require text to be entered.
The following text input modes are available
on the phone.
Changing the Text Input Mode
You can change the text input mode by
touching the Text Input Mode toggle button
on the touch screen.
ABC Mode
This mode allows you to enter letters by
touching the key labeled with the required
letter until the letter is displayed.
To Next Page
Loading...
Need help?
General
