85
Settings
Set Storage Defaults
You can set Storage default for each case.
When you need to save files from Camera,
Internet Download, Bluetooth and Voice
Recorder, set Phone Memory or Memory card.
You can set each case separately or choose
the All option and set the Storage Default all
the same.
Software Update
The AT&T server notifies devices using a WAP
push message when new software exists.
Also the user can check for the software
update using the menu “Check for Update”.
If the new software does not exist the user
can not use this feature in 24 hours. Before
updating new software after downloading
it from the AT&T server, users can decide
whether they would like to postpone the
operation. Reminder times can be set to
4 hours. When the time is up, users are
prompted again or users can resume the
postponed operation using this menu at
any time. The software update can only be
postponed three times and will automatically
start after the third postpone period expires.
Phone Information
This menu is used to view My Number,
Manufacturer, Model Name, Device ID,
Hardware Version, Software Version,
Language and DM Client Version information.
Accessibility
Use the Accessibility settings to configure any
accessibility plug-ins.
ŹMenu Readout: Allows you to set up
the Menu Readout function which assists
people with impaired vision by providing
verbal feedback. Tap the switch to
turn it on.
ŹDial Readout: Allows you to set up the
Dial Readout function which assists people
with impaired vision by providing verbal
feedback. T
ap the switch to turn it on.
ŹLarge Text: Tap the switch to increase
the size of text.
To Next Page
Loading...
Need help?
General
