To Next PageTo Next Page
Need help?Do you have a question about the LGL Electronics EcoPower and is the answer not in the manual?
General| Brand | LGL Electronics |
|---|---|
| Model | EcoPower |
| Category | Sewing Machine |
| Language | English |
Identifies and describes the primary components and control interfaces of the feeder.
Provides physical dimensions and weight for both ECOPOWER versions.
Details the feeder's proper applications, improper uses, operational features, and technical data.
Guidelines on how to safely handle and store the yarn feeder.
Explains the function of the input feeler and its role in machine stop operations.
Describes the optical sensor's function in automatic speed adjustment.
Details the magnetic sensor for monitoring yarn winding reserve on the spool body.
Explains the feeler that signals yarn snaps or breaks at the feeder output.
Procedures for vertically and horizontally mounting the yarn feeder and connecting cables.
Details the external and internal views and connections of the power supply box.
Wiring diagram and instructions for the transformer kit used with feeders.
Explains the installation and procedure for the KLS kit for yarn breakage detection.
Illustrates partial, complete, and Attivo version threading methods for the yarn feeder.
Explains that speed adjustment is automatic and no operator intervention is needed.
Details how to adjust yarn tension using the TWM modulator or the automatic Attivo system.
Explains the meaning and function of each DIP-SWITCH setting for feeder configuration.
Guide on installing the yarn consumption kit and setting DS4 for bus termination.
Step-by-step instructions on how to safely remove the yarn spool body.
Information that replacement of the main control board must be done by authorized personnel.
Instructions for removing and installing the TWM tension modulator unit.
Explains how the ATTIVO system holds constant, programmable yarn tension.
Steps to enable the tension sensor's OFFSET function (mechanical error zero).
Table showing yarn types, springs, and corresponding yarn count ranges for TWM models.
A comprehensive table for converting yarn counts between Nm, Ne, tex, den, Dtex, and NeL.
Solutions for feeders not working after fitting, including connection and fixing point checks.
Addresses issues like signal lights not working or feeder failures, recommending authorized repair.
