23
3 - THREADING AND ADJUSTMENTS
3.2 SPEED ADJUSTMENT
The yarn feeder is provided with a microprocessor and an output sensor that
enable automatic speed adjustment that conforms to machine feeder
speed.
No speed adjustment is therefore required by the operator.
For applications that may require special operational conditions, please
consult subsequent paragraph 4 herein.
3.3 TENSIONING ADJUSTMENT
Adjust tensioning until required yarn tension is reached by acting on the
outbound tension modulator (TWM) that is fitted onto the feeder.
Use the adjusting twist-knob to do so.
However, tensioning adjustment is completely automatic in yarn feeders that
are equipped with the ATTIVO electronic tensioner.
Torx key insertion
point.
To Next Page
Loading...