LGMG MT86 - Page 29

MT86 Operation and Maintenance Manual
23
NO.
Name
state
Function
Remarks
6
Rear working
lamp switch
0
Rear working lamp OFF
1
Rear working lamp ON
The side working lamp is also controlled by this switch.
7
Inter-axle
differential switch
0
OFF
1
ON
Inter-axle differential solenoid valve actuated; when inter-axle
differential switch is set to proper position, the corresponding
indicator lamp on the instrument will be on.
8
Horn change-over
switch
0
Electric horn selected
Press down horn on the steering wheel, and it will work.
1
Air horn selected
Press down horn on the steering wheel, and it will work.
9
Side window wiper
switch
0
Function shutdown
1
LOW speed
2
High speed
10
Windshield washer
switch
0
Function shutdown
1
LOW speed
2
High speed
11
The power curve of
the rocker switch
0
OFF
1
ON
NOTE: The rocker switch with striker has an anti-mistrigger function. It cannot be moved unless the striker is pulled
down; and it will auto reset as long as the striker is released. See figures below for operation.
Pull down the striker, and
meanwhile, move the switch
Release the striker, and it
will automatically reset