Page 17
www.licor.com/bio
Specifications
Operating Conditions: For Indoor use only; operating temperature 15-35°C and dew point not greater than 22°C, non-
condensing; maximum operating temperature may be reduced at elevations above
2000 m.
Environmental Conditions: Pollution Degree 2.
Dynamic Range: 22 bit (>6 logs)
Depth of Field for Best Sample Focus: 6 mm
Patented FieldBrite
TM
Technology: CV <3%
600 Channel Light Source: Light source at 520 nm
700 Channel Laser Source: Solid-state Laser Diode at 685-690 nm
800 Channel Laser Source: Solid-state Laser Diode at 785 nm
Laser Lifetime: 20,000 hours
Detector Type: Low-noise CCD. Thermoelectrically cooled.
Acquisition Times:
600, 700 and 800 nm channels: 30 s, 2 min, 10 min plus advanced variable time feature.
Chemiluminescence channel: 30 s, 2 min, 10 min, 60 min plus advanced variable time feature.
Focusing: None needed.
Sensitivity: Similar to Odyssey
®
Infrared Imaging System
Wavelength Maxima for Excitation/Emission Bands:
Dyes: Optimized for LI-COR
®
IRDye
®
680LT and IRDye
®
800CW reagents, and chemiluminescent substrates.
Image Display Options: Pseudocolor, positive and negative grayscale, single color (red, green or blue), or two colors
with overlapping fluorescence displayed in a third color.
Capacity: One imaging tray containing one blot or gel.
Channel Excitation Emission
600 nm 520 nm 600 nm
700 nm 685-690 nm 730 nm
800 nm 785 nm 830 nm
Chemiluminescence none Visible
To Next Page
Loading...
