Need help?Do you have a question about the Lightspeed Tango and is the answer not in the manual?
General| Speaker Frequency Response | 20 Hz - 20 kHz |
|---|---|
| Microphone Frequency Response | 100 Hz - 10 kHz |
| Impedance | 32 Ohms |
| Cable Length | 1.5 m |
| Connector | 3.5 mm |
| Headphone Impedance | 32 Ohm |
| Microphone Impedance | 2.2 kOhm |
| Weight | 280g |
Properly fit headset for comfortable use and superior Active Noise Reduction.
Install batteries and understand LED indicators for charging and power status.
Detailed explanation of the front and back panel interface controls and ports.
Learn about the headset's power, volume, ComPriority, and linking features.
Instructions for turning the system on/off and understanding Auto Shutoff function.
Match stereo/mono settings and connect wired auxiliary devices.
Use color chips to easily identify paired headsets and panel interfaces.
Configure channel selection for simultaneous use of multiple headsets in an aircraft.
Step-by-step guide to pair your Bluetooth cell phone or device with the headset.
Learn to turn Bluetooth on/off and use its cell phone features like redialing and answering.
Download, activate, and toggle between FlightLink and other apps for cockpit recording.
Resolve issues with radio audio, Bluetooth pairing, and device connectivity.
Address warbling noise, audio dropouts, static reduction, and serial number location.
Details on aviation connectors, battery, and headset weight.
Technical specifications for headphone transducer, frequency response, and microphone.
Information on the Active Noise Reduction (ANR) maximum SPL.
Understand the limited warranty terms for new aviation headsets and batteries.
Instructions on how to register your product for optimized customer experience.
To Next Page
