Lightspeed Tango - Peak Performance Tips

21
Start with an excellent fit. See “Fitting your headset”
on page 4.
Set Tango’s stereo/mono switch to match the signal
from your audio panel. See “Matching Tango’s
stereo/mono setting to your audio panel signal” on
page 12.
Keep cell phones at least 12 inches from the Tango
panel interface and headset when making call to
reduce static noise during phone calls.
To conserve battery life, turn OFF Bluetooth mode
when not in use.
Lightspeed Link has been optimized for wireless
aviation performance. However, there is still a slight
delay (latency) in the wireless path. To minimize
the sound of the echo, try placing the microphone
closer to your mouth. Slightly increasing the level
of your intercom either with the headset volume
control or directly on the intercom.
Lightspeed recommends replacement of the soft
goods on your headset (ear seals, head pads and
micmus)every18monthstoensurepeakANR
performance and comfort. These are wear items
and are not covered by the Lightspeed warranty
and are available for purchase on our website at
LightspeedAviation.com/Accessories.
Peak Performance Tips