Lightspeed Tango - The Panel Interface (Back)

8
A
B
C
E
F
D
The panel interface (back)
A. Channel select switch: Changes the channel
of the boom microphone link. Changing the
factory setting is only necessary when using
multiple Tango headsets in the same aircraft.
See “Multiple Headsets” on page 14.
B. Link button: This button is used to establish the
wireless link between the headset and panel
interface. The system is shipped with the link
already established and this button is only
needed when a new headset/panel interface
connection needs to be established.
See “Multiple Headsets” on page 14.
C. LinkLED:BlinkingRED indicates not linked.
Solid RED indicates link established.
Getting Started