Lightspeed Tango - Specifications; Connectors and General Specs; Headphone and Microphone Specs; ANR Specifications

23
Connectors
ConnectorDualgeneralaviationconnectorswith
.250-inchcommercialstereoheadphoneplugand
.206-inchMIL-SPECmicrophoneplug
General
Battery power supply: 3.7V Lithium Ion battery
Headset Weight (with battery): 18 oz.
Headphone
Transducer: 40mm moving coil
Frequencyresponse:20Hz-20kHz
Nominal impedance when wired with backup cable
@ 1 kHz:
Mono: 180 ohms
Stereo: 250 ohms
Microphone
Transducerprinciple:Noise-cancelingelectret
Frequencyresponse:200Hz-6000Hz
Maximum SPL: 114 dB
Terminating impedance: 220–2200 ohms
Operatingvoltage:8V–16VDC
ANR
Maximum SPL: Greater than 120 dB at 100 Hz
Specifications