Lightspeed Tango - Panel Interface Overview (Front & Back)

6
A
C
B
D
E
F
G
H
I
The panel interface (front and side)
A. Auxiliary input: Use the supplied cable to
connect a wired auxiliary audio source or phone.
Also use this connection for FlightLink recording
functions. See “FlightLink” section on page 18.
B. Power button: Press button once to turn the
panel interface on; press and hold to turn it off.
C. PowerindicatorLED:FlashesGREEN when
power is supplied and batteries are strong.
Flashes RED when there are approximately 3
hours of battery life remaining.
D. BluetoothindicatorLED:FlashesBLUE when
Bluetooth mode is on and RED when Bluetooth
is being turned off. In pairing mode, flashes
alternating RED and BLUE.
Getting Started