Lightspeed Tango - Getting Started; Fitting Your Headset

4
Fitting your headset
Fitting your headset properly is the key to
comfortable use and superior Active Noise
Reduction(ANR)capabilities.Togainpeak
performancefromtheANRfeatureit’snecessaryto
have a solid seal around your entire ear combined
with a symmetrical fit on your head.
The following tips will assist in achieving the proper fit.
A. Fit your ears entirely within the ear cups
providing a solid seal.
B. Resttheheadbandlightlyontopofyourheadwith
the right and left sliders extended to equal lengths.
C. Position the microphone 1∕8 inch from your
mouth, with the gain adjustment cap facing away
from you (visible when you remove the mic muff).
Note: The microphone will not transmit unless the
panel interface is plugged into an intercom and the
system is turned on.
Getting Started
This side of the microphone
should face away from you.