19
Why do I hear radio communications
in only one ear?
Tango’s stereo/mono switch is probably set to
Stereo while your audio panel is transmitting a
mono signal. To fix this, change Tango’s stereo/mono
switch to Mono. This setting does not affect music
or audio from auxiliary devices; you can hear stereo
sound on auxiliary devices even when the stereo/
mono switch is set to Mono.
When pairing Tango with my Bluetooth device,
why does my device indicate it cannot connect?
The headset may not be in pairing mode. To enter
pairing mode, you must start with Bluetooth mode
turned fully OFF. See “Connecting Bluetooth cell
phones for the first time” on page 16.
Why doesn’t my Bluetooth device accept
Tango’s 0000 passcode?
Your headset may not be in pairing mode. Some
devices prompt for a pass code without checking
for pairing mode. When the device cannot pair with
the headset, it rejects the passcode. To enter pairing
mode, you must start with Bluetooth mode turned
fully OFF. See “Connecting Bluetooth cell phones for
the first time” on page 16.
How can I reduce static noise during
cell phone calls?
ToreduceRFinterferenceduringphonecalls,
keep cell phones at least 12 inches from the Tango
controller and headset when making calls.
FAQs
To Next Page
Loading...
