Lightspeed Tango - Page 9

7
E. Bluetooth button: Turns the Bluetooth function
onandoandcontrolsBluetooth-connected
devices, including cell phones and music players.
F. ChargingLED:RED/AMBER indicates charging in
progress. GREEN indicates charging complete.
G. USB charging port: Plug in USB cable to charge
the battery. Note: You can charge the battery
while using the panel interface.
H. Channel identification color chip
I. Backup cable: In the event that you lose power
in the headset or the panel interface, pull the
backup cable from the panel interface and plug
it into the headset.
Note: Plugging the backup cable into the
headsetwillturnotheANR.Theheadsetwill
run in passive mode.
Getting Started