UCX series – User's Manual 112
Change the Input Port Priority
Command and Response
ç SET·/V1/MEDIA/VIDEO/AUTOSELECT/<out>/<in>.Priority=<prio_num>
æ pw·/V1/MEDIA/VIDEO/AUTOSELECT/<out>/<in>.Priority=<prio_num>
Parameters
The <prio> parameters means the priority number from 1 to 100, equal numbers are allowed. Inputs can
have different priorities in relation with two or more outputs. Therefore the output port number is part of the
node path of input port priorities.
Example
ç
æ
Command and Response
ç GET·<out>.ConnectedSource
æ pw·<out>.ConnectedSource=<in>
Example
ç
æ
Command and Response
ç GET·<n>.ConnectedDestinations
æ pr·<in>.ConnectedDestinations=<out>
Example
ç
æ
Busy
value of the switchable property refers to the limitation.
Command and Response
ç GET·<out><in>
æ pr·<out><in>=<switchable_state>
Parameters
Parameter Parameter description
<switchable_state> The chosen input is can be
switched to the output or not.
OK
The connection of the chosen input and
output is allowed.
Busy
The chosen input can not be switched to the
output.
Example
ç
æ
Command and Response
ç GET·<port>.SignalPresent
æ pr·<port>.SignalPresent=<state>
Parameters
Parameter Parameter description
<state> This property gives a feedback about
the current signal presence of the port.
true
The video signal is present.
false
The video signal is not present.
Example
ç
æ
To Next Page
Loading...
