Lightware UCX-2x1-HC30 - Lock the Video Port; Mute the Video Port; Video Port Settings - General; Switch an Input to All Outputs

 UCX series – User's Manual 77

Video Port Settings - General
Switch Video Input
Request and Response
ɯ  <ip>
ɯ body: <in>:<out>
ɮ header: 200 OK
Example
ɯ  
ɯ body: I5:O1
ɮ header: 200 OK
INFO:  
output.
ATTENTION!  
of them can be selected to any output. 
not be switched to I1 or I5. In this case the switch command returns error message.
Example
ɯ  
ɮ body: I5
ɯ  
ɮ body: I5
ɯ  
ɯ body: I1:O1
ɮ header: 405 Method Not Allowed
Switch an Input to All Outputs
Request and Response
ɯ  <ip>
ɯ body: <in>
ɮ header: 200 OK
Example
ɯ  
ɯ body: I1
ɮ header: 200 OK
Lock the Video Port
Request and Response
ɯ  <ip><port>
ɯ body: <locked_state>
ɮ header: 200 OK
ɮ body: <locked_state>
Parameters
Parameter Parameter description  
<locked_state> 
true
The port is locked
false
The port is unlocked
Example
ɯ  
ɯ body: false
ɮ header: 200 OK
ɮ body: false
Mute the Video Port
Request and Response
ɯ  <ip><port>
ɯ body: <muted_state>
ɮ header: 200 OK
ɮ body: <muted_state>
Parameters
Parameter Parameter description  
<muted_state> Muted state
true
The port is locked.
false
The port is unlocked.
Example
ɯ  
ɯ body: false
ɮ header: 200 OK
ɮ body: false



