UCX series – User's Manual 114
OutputSignalType
Command and Response #signaltype
ç <out>.OutputSignalType=<signal_type>
æ pw·<out>.OutputSignalType=<signal_type>
Parameters
Parameter Parameter description
<signal_type> Signal type setting
Auto
The outgoing signal type is HDMI.
DVI
Example
ç
æ
Output5VMode
Command and Response
ç <out>
æ <out>
Parameters
Parameter Parameter description
On
Off
Example
ç
æ
Welcome Screen Settings
Display Welcome Screen Image
Command and Response #welcomescreen
ç SET·/V1/MEDIA/VIDEO/I5/WELCOMESCREEN.ImageEnabled=<image_state>
æ pw·/V1/MEDIA/VIDEO/I5/WELCOMESCREEN.ImageEnabled=<image_state
Parameters
Parameter Parameter description
<image_state>
true
false
The welcome screen image is displayed.
The welcome screen image is not displayed.
Example
ç
æ
Display Welcome Screen Text
Command and Response
ç SET·/V1/MEDIA/VIDEO/I5/WELCOMESCREEN.MessageEnabled=<text_state>
æ pw·/V1/MEDIA/VIDEO/I5/WELCOMESCREEN.MessageEnabled=<text_state
Parameters
Parameter Parameter description
<text_state>
true
false
The welcome screen text is displayed.
The welcome screen text is not displayed.
Example
ç
æ
Set Welcome Screen Text
Command and Response
ç SET·/V1/MEDIA/VIDEO/I5/WELCOMESCREEN.MessageText=<text>
æ pw·/V1/MEDIA/VIDEO/I5/WELCOMESCREEN.MessageText=<text>
Parameters
The <text> may consist of letters (A-Z) and (a-z), hyphen (-), underscore (_), numbers (0-9), space ( ) and dot
Example
ç
æ
To Next Page
Loading...
