Page 219 of 295
9. MJB5 Plus Port Repeater (MEDLINE
®
CARELINE
®
)
The modular junction box MJB5 Plus is designed for use together with OpenBus™
control boxes.
The MJB5 Plus makes it possible to connect multiple hand controls and attendant
controls. It can even be used for charging or to connect the Under Bed Light and 3
rd
party products.
MJB5 Plus Port Repeater, version 000:
The MJB5 Plus version 000 is used where there is a need for more ports than
available in the control box.
It is possible to connect multiple MJB5 Plus boxes obtaining unlimited extra
connections to the control box.
Usage
• Compatibility: All OpenBus products
• Operation temperature: +5
o
C to +40
o
C
• Storage temperature: -10
o
C to +50
o
C
• Relative humidity: 20% to 80% non-condensing
• Atmospheric pressure: 700 to 1060 hPa
• Operational meters above sea level: Max. 3000 meters
• Latex free: Yes
• Approvals: IEC60601-1, IEC60601-1-6
ANSI/AAMI ES60601-1
CAN/CSA-22.2 No 60601-1
MJB5 Plus Port Repeater Usage
Compatibility: All OpenBus products and CA control boxes.
Modular plug cable, narrow/wide alignment grooves:
Modular plug with wide alignment groove.
To be used with LINAK products.
Can be connected to all ports in the MJB5 Plus, both ports with narrow and wide alignment grooves.
Modular plug with narrow alignment groove.
To be used with 3
rd
party products.
Can only be connected to ports in the MJB5 Plus with narrow slit. This is to
prevent 3
rd
party products to interfere with the OpenBus™ connections.
To Next Page
Loading...
Need help?
General
