4 Operation
Special equipment
5
= problem with steering
6
= damage (accident)
7
= user-defined
8
= user-defined
9
= user-defined
The state messages
7
,
8
,
9
can be define
d
individually by the user. Please c
ontact your
fleet manager to find out about def
inition of
these state messages.
NOTE
If you do not notice one of these states (e.g.
problem with driving) until after you have
logged on with the state code
0
(vehicle OK) ,
you will have to log off again.
¾ Turn the rotary button (in place o
fkey
switch) anticlockwise as far as i
t will go.
¾ Log back on with state message
3
(problem
with driving).
Forklift Data Acquisition - standard set-
ting (PIN number and state code)
Log on and start vehicle:
¾ Operate parking brake.
60 Operating Instructions – 386 807 1001 EN – 03/2006
To Next Page
Loading...
