5 Servicing
Inspection and maintenance as required
e3861318
Clean lift mast chain and apply chain
spray
DANGER
Lift mast chains are safety elements. Incorrect
cleaning materials may indirectly cause damage to
chains.
Do not use cold / chemical cleaners or fluids that
are corrosive or contain acid or chlorine.
If the lift mast chain is so dusty that penetration
of the lubricating oil is not ensured, the chain
must be cleaned.
¾ Place a collection vessel under the lift mast.
¾ Clean lift mast chain with paraffin deriva-
tives such as petroleum ether.
Take note of the manufacturer’s safety infor-
mation. When cleaning with a steam jet, do
not use additives.
¾ After cleaning, immediately apply com-
pressed air to chain to remove any water
remaining on the surface and in the chain
joints.
The chain should be moved several times
during this process.
¾ Immediately apply Linde chain spray to
chain, also moving chain while doing so.
100 Operating Instructions – 386 807 1001 EN – 03/2006
To Next Page
Loading...
