EasyManua.ls Logo

Linde E16 - Check Wheel Gear for Leaks; Double Hoses: Check Pretension

Linde E16
222 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Servicing 5
Inspection and maintenance every 3000 operating hours or every 2 years
Check wheel gear for leaks
¾ Raise the forklift truck with the jack at the
front on the left and/or right.
¾ Place pieces of timber underneath.
e3861301
¾ Check the wheel gear for leaks on t
he right
and left depending on the versi
on at the
filling / checking screw and dr
ainplugas
well as at the housing flange.
¾ Please contact your authorised dealer in
the event of any leakage.
e3861340
Double hoses:
Check pretension
NOTE
For vehicles with the standard lift mast and
additional hydraulics attached the pretension
of the double hoses must be checked.
Pretensioning of the double hoses should be
5-10 mm per metre, based on the initial length.
¾ Adjust the pretension by sliding the hoses
in the retaining clips to the measurement
specified .
Operating Instructions 386 807 1001 EN 03/2006 131

Table of Contents

Related product manuals