5 Servicing
Inspection and maintenance every 500 to 1000 operating hours or once a year
e3861400
Check function of control unit
Specialist knowledge and special tools are
required to check the lower / stop and release
valve in the control unit.
Please contact your authorised dealer.
Clean and grease the sideshift,
check that it is securely fastened
ENVIRONMENT NOTE
Take note of information about working mate-
rials.
NOTE
Grease the sideshift after each occasion when
the fork-lift truck has been washed. Use the
grease specified in the list of recommended
lubricants
¾ Useasteamjettocl
ean the sideshift.
¾ Check the hydraulic hoses for chafe points,
exchange them as necessary
¾ Check that the hydraulic connections and
fastenings are tight and are not worn,
tighten or exchange them as necessary.
112 Operating Instructions – 386 807 1001 EN – 03/2006
To Next Page
Loading...
