CHAPTER 3C ENGINE 100/125/150/200 SERVICE MANUAL09.0
CHAPTER 3C ENGINE PAGE.3C - 17 -
7. Check oil seals and axles wear.
8. Take out primary gear axle and check its wear.
Install it in the reverse order of removal. And add
sufficient oil.
3.4.5 Transmission (for B-type 150/200)
3.4.5.1 Transmission Disassembly
1. Remove transmission case drain plug
located on the front cover and drain the oil.
2. Remove transmission case fixing bolts.
3. Knock the input shaft carefully with a soft
face hammer to separate the transmission
case from the left crankcase.
To Next Page
Loading...
Need help?
General
