M565Li OWNER’S/OPERATOR’S MANUAL
16. MAINTENCE
77
Front Wheel Hub Tightening
Front wheel bearing tightness and spindle nut retention are critical component
operations. Service work must be performed by an authorized dealer.
Tapered nuts: install with tapered side against wheel.
Air Filter
The sponge-type air filter inside the air filter housing must be kept clean to provide
good engine power and to protect the engine. If the ATV is used under normal
conditions, service the filter at the intervals specified in the Maintenance Schedule.
If operated in dusty, wet, or muddy conditions, clean the filter more frequently.
Failure to inspect the air filter frequently if the ATV is used in dusty,
wet, or muddy conditions can damage the engine.
Air Filter Service
1.
Remove the seat.
2.
Release clips and remove cover.
3.
Remove the filter.
4.
Place the filter in a pan and spray both
sides generously with Cleaning Solvent, for
example MAXIMA AIR FILTER CLEANER;
then let sit approximately 3 minutes.
5.
Wash all the dirt and oil off by squeezing
the element, not twisting it (ringing out or twisting the filter can cause damage).
To Next Page
Loading...
