Linksys E3000 - Page 59

Linksys E3000 Appendix B: How to Install and Access USB Storage
56
High Performance Wireless-N Router
Create a User Group Account
1. Click the Storage tab.
2. Click the Administration tab.
Storage > Administration
3. In the Group Management section, click Create New
Group.
Group Account
4. In the Group Name field, create a name for the group.
5. In the Description field, enter keywords to describe the
group.
6. From the Access drop-down menu, select the
appropriate level of access, read and write or read
only.
7. Click Save Settings to apply your changes, or click
Cancel Changes to clear your changes. Click Close to
exit the screen and return to the Administration screen.
Create a User Account
1. Click the Storage tab.
2. Click the Administration tab.
Storage > Administration
3. In the User Management section, click Create New
User.
User Account
4. In the User Name field, create a name for the user.
5. In the Full Name field, enter the actual name of the
user.
6. In the Description field, enter keywords to describe the
user.
7. In the Password and Confirm Password fields, enter the
password that the user will use for login.
8. From the Group Member drop-down menu, select the
appropriate user group.
NOTE: To temporarily disable an account, select
Account Disabled.
9. Click Save Settings to apply your changes, or click
Cancel Changes to clear your changes. Click Close to
exit the screen and return to the Administration screen.