Linksys E3000 - USB Storage Setup for Mac OS X

Linksys E3000 Appendix B: How to Install and Access USB Storage
52
High Performance Wireless-N Router
Access Mapped Drive
1. On your desktop, double-click the My Computer icon.
My Computer Icon
NOTE: If the My Computer icon is not displayed,
then go to Start > All Programs > Accessories
> Windows Explorer.
2. Double-click the mapped drive to access it.
Double-Click Mapped Drive
Mac OS X
Install the USB Storage Device
1. Make sure your computer has a wired or wireless
connection to the Router.
2. Connect an external USB hard disk drive or USB flash
disk to the USB port of the Router.
Reset
Internet
Ethernet4 3 2 1
Power
12VDC
USB
Access the USB Storage Device
1. From your desktop select Go > Network.
2. Double-click the server name.
NOTE: If you used the setup software
to install your Router, then the name
of your wireless network will be the
server name (up to 15 characters). If not,
the name will appear as Ciscoxxxxx (xxxxx
represents the last five digits of the Router’s
serial number.)