Linksys E3000 - Main Menu

Linksys E3000 Chapter 2: Cisco Connect
4
High Performance Wireless-N Router
c. Unplug the existing Ethernet cable from your
computer and plug it into the yellow port labeled
Internet on the back of the Router. Click Next.
Reset
Internet
Ethernet4 3 2 1
Power
12VDC
USB
Connect Ethernet Cable
NOTE: You can view detailed connection steps
by clicking in the setup software.
NOTE: If the setup software detects multiple
routers, then select the serial number located
on the left side of the product label, which is on
the bottom panel of the Router.
5. Please wait while the setup software is setting up the
Router.
Please Wait
6. The installation is complete. Click OK.
Installation is Complete
NOTE: If you have any problems during the
installation process, refer to the Frequently
Asked Questions (FAQs) in the setup software,
or use a computer with an active Internet
connection to visit www.linksys.com/support.
Main Menu
When Cisco Connect starts up, the main menu appears:
Main Menu
The status of your Internet connection is displayed in the
upper right corner:
• online secure
Your local network is secure, and your Internet
connection is available.
• offline secure
Your local network is secure; however, your Internet
connection is not available. To repair your Internet
connection, follow the on-screen instructions.
NOTE: A group of computers or other devices
connected to a router is a local network.
The router allows the networked devices to
communicate with each other.
The main menu offers four options: Computers and
devices, Parental controls, Guest access, and Router
settings.
NOTE: To view the FAQs for more information,
click Need help?