22
To store the programme
Press STOP (handset).
The display will then show the total number of tracks you have
programmed in the play list; for example 12.
You can programme a play list of up to 20 tracks. When the play list
is full the programme will be stored automatically.
To view the play list
After storing the programme you can view the play list by pressing
SKIP ” or ’ (handset). At each step the display will show the
track number and its position in the play list.
To play the programme
Press > (front panel) or PLAY (handset).
You can use [ or ] (front panel) or SKIP ” or ’ (handset) to
skip through the track selection.
To add to the programme
You can add additional tracks to the end of an existing programme
by repeating the programming procedure described above. New
tracks you programme are added to the end of the existing play
list.
To clear the programme
Open the CD drawer, or put the CLASSIK into standby.
The programme is also cleared if you use the IntroScan, Random,
or Shuffle modes.
To Next Page
Loading...
