21
Programming a selection of tracks (programme mode A)
In programme mode A you can choose to play a specific selection
of tracks in a specified order.
To create a programme
Before starting, make sure you have inserted a disc and that it is
stopped.
Press and hold DISPLAY (handset) for about two seconds until the
display shows P--A to indicate that programming mode A has been
selected.
The display then shows P 00 to indicate that the play list is empty.
Select the first track to be played using the SKIP ” or ’ keys
(handset), or enter a track number directly using the numeric keys.
Then press DISPLAY (handset) to store the selected track.
The display shows the position in the play list of the track you have
entered; for example P 01.
Repeat the procedure to enter the other tracks you want to play.
You can add tracks in any order, and repeat tracks in the play list.
To Next Page
Loading...
