31
Recording a source
The CLASSIK allows you to record from the internal CD player and
all the inputs except TP2. Pressing the RECORD key stops you
accidentally changing the input while recording.
When the RECORD indicator is lit you can only switch between the
input you are recording and TP2, which is intended for monitoring
the recording.
To set up a recording
First select the source you want to record using SRC- and SRC+
(front panel) or CD, TUN, AUX, or TP1 (handset).
Then lock the input by pressing RECORD (handset). The RECORD
indicator will be lit to show that the source is being recorded.
If you attempt to change source while record lock is selected the
display will show record lock to remind you that a recording is
active.
To monitor the recording
Press SRC- or SRC+ (front panel), or TP2 (handset), to switch
between the audio source you are recording and the monitor input.
To cancel a recording
Press RECORD (handset) again.
The RECORD indicator will be switched off and the LISTEN
indicator will be lit.
To Next Page
Loading...
