34
Using the timer
The timer allows you to put the CLASSIK to standby after a
specified time. For example, you can drift off to sleep listening to
your favourite CD without having to worry about switching it off.
The timer delay can be set to 0 (off), 15, 30, 60, or 90 minutes.
To set the timer
Press TIMER (handset).
The display shows Set sleep followed by the current timer value
which is initially 0 (off).
Set the timer value using TIME- or TIME+ (handset). You can
choose one of the values 0 (off), 15 minutes, 30 minutes, 60
minutes, or 90 minutes.
To start the timer press TIMER (handset) again. The display will
show the message Sleep set, and the red alarm/timer light will
flash slowly to indicate that the timer is running.
At any point when setting the timer you can press CLOCK
(handset) to cancel the operations and leave any previous settings
unchanged.
To switch the timer off
Put the CLASSIK into standby or set the timer value to 0.
To Next Page
Loading...
