7
Connecting the CLASSIK
The following diagram shows the connections for the rear panel of
the CLASSIK:
WARNING: The CLASSIK should be switched off before connecting
or disconnecting any of the plugs on the rear panel, or you may
generate surges which could damage other components in your
hi-fi system.
Connecting the sources
In addition to the internal CD source, the CLASSIK provides line-
level RCA phono input connections for up to four other sources.
For convenience these are labelled TUNER, AUX, TAPE1, and
TAPE2/MONITOR on the back panel, but you can use them for any
appropriate sources in your system.
We recommend using high-quality leads such as Linn Interconnect
cables. These are directional and should be connected so that the
arrow points from the source component towards the CLASSIK.
To Next Page
Loading...
