42
User options
The following table lists the user options provided. In each case the
default value is shown underlined.
Number Name Description Values Explanation
U1 Default Volume The default volume setting 0 = Vol 15 Vol 15
on power up, or the default 1 = Vol 30 Vol 30
volume setting from 2 = Timed Vol 5 between 10pm and
standby if U5 is not 7am, otherwise Vol 15.
enabled.
U2 Disable Sleep Changes the display sleep 0 = Sleep Display sleeps, no clock in
Mode and clock mode. standby.
1 = Neither Display stays on, no clock in
standby.
2 = Both Display sleeps, clock in
standby.
3 = Clock Display stays on, clock in
standby.
U3 Auto-Memory Stores the individual volume 0 = Disabled Single volume and balance
and balance setup for each values for all inputs.
input source, and allows you 1 = Enabled Individual volume and
to match input levels balance settings for each
between sources; eg TAPE input, and also retains the
and CD. last source selected on
switch off.
To Next Page
Loading...
