28
Changing the volume and balance
By default, when the CLASSIK comes out of standby the volume is
automatically limited to a maximum value of 30. If you prefer you
can choose how the CLASSIK powers up from several alternatives;
see
Customising the CLASSIK
, page 40.
To change the volume
Press VOL- or VOL+ (front panel or handset), or hold down the
corresponding key to decrease or increase the volume
continuously.
You can change the volume in precise steps of 1dB from 0 to 60.
To display the current volume setting press either key briefly.
To mute the sound
Press M (front panel) or MUTE (handset).
The MUTE indicator will be lit, and the sound will be muted.
Note that to eliminate any possibility of noise or clicks when the
sound is muted, the CLASSIK totally isolates the preamplifier
output.
To unmute the sound press M (front panel) or MUTE (handset)
again. Pressing VOL- or VOL+ (front panel or handset) will also
restore the sound if it is currently muted.
To Next Page
Loading...
