23
Excluding tracks (programme mode B)
In this programme mode you can omit one or more tracks when
the disk is played.
To create a programme
Before starting make sure that you have inserted a disc and that it
is stopped.
Press and hold DISPLAY (handset) for about four seconds until the
display shows P--b to indicate that programming mode B has been
selected.
The display will then show P-00 to indicate that the omit list is
empty.
Select the first track you want to omit, using SKIP ” or ’
(handset), or enter the track number directly using the numeric
keys.
Then press DISPLAY (handset) to store the specified track in the
omit list.
The display shows the position in the omit list of the track you have
entered; for example P-01.
Repeat this procedure to enter any further tracks you want to omit.
To Next Page
Loading...
