24
To store the programme
Press STOP (handset).
The display will then show the total number of tracks you have
programmed to be omitted; for example 7.
You can enter a list of up to 20 tracks to be omitted. When the list
is full it will be stored automatically.
To view the omit list
After you have stored the programme you can view the omit list by
pressing SKIP ” or ’ (handset). At each step the display will
show the track number to be omitted and its position in the list.
To play the programme
Press > (front panel) or PLAY (handset). The tracks you have
specified will be omitted.
You can use [ or ] (front panel) or SKIP ” or ’ (handset) to
skip between the remaining tracks in the usual way.
To add to the omit list
You can add more tracks to the omit list by repeating the
programming procedure described above. New tracks you
programme are added to the end of the existing omit list.
To clear the programme
Open the CD drawer, or put the CLASSIK into standby.
The programme is also cleared if you use the IntroScan, Random,
or Shuffle functions.
To Next Page
Loading...
