30
To change the bass
Press and hold ADJUST (front panel) for approximately 1.5
seconds, and release the key before the display bar reaches the
centre of the display. The display will then show b followed by the
current bass setting. Then press VOL- or VOL+ (front panel) to
adjust the bass to the required setting.
Alternatively press BASS- or BASS+ (handset).
You can change the bass between b-7 (14dB bass attenuation),
through b0 (level bass), to b7 (14dB bass boost).
After adjusting the bass the display will revert to normal after a
delay of five seconds.
To change the treble
Press and hold ADJUST (front panel) until the display shows t
followed by the current treble setting. Then press VOL- or VOL+
(front panel) to adjust the treble setting.
Alternatively press TREB- or TREB+ (handset).
You can adjust the treble between t-7 (14dB treble attenuation),
through t0 (level treble), to t7 (14dB treble boost).
After adjusting the treble the display will revert to normal after a
delay of five seconds.
To Next Page
Loading...
