SG1000
™
SMOKE GENERATOR
16
WWW.LIONPROTECTS.COM
4.12 WIRELESS REMOTE
The optional wireless remote control can be congured to operate up to 8 Smoke
Generator 1000s and/or Smoke Generator 4000s.
A combination of two modes can be used to control Smoke Generators using
the Wireless Remote. The rst mode is GROUP MODE and the second mode is
BURST MODE. Group Mode allows you to control two sets of Smoke Generators
independently on one remote using the On-Demand (SMOKE), Continuous (AUTO),
and Continuous Maximum (CONT) modes. Burst Mode allows you to control eight
sets of Smoke Generators using On-Demand Mode only.
4.13 GROUP MODE
When you select Group Mode, the remote can control two sets of Smoke
Generators independently on one remote. The two sets are designated Group A
and Group B. Multiple Smoke Generators can be programmed as Group A or as
Group B.
When you select Group Mode, four buttons are
available for the following functions:
SMOKE − triggers the On-Demand mode where
smoke is produced as long as the button is held down.
AUTO − machine makes continuous smoke at the level
which is set by the “density” control (4).
CONT − machine makes smoke continuously at
maximum level.
STOP − machine stops making smoke.
4.14 BURST MODE
When Burst Mode is selected, between 1 and 8 Smoke Generators can be
programmed to emit a burst of smoke, as long as the corresponding button
is pressed.
To Next Page
Loading...
Need help?
General
