LiteOn EVO 8000 Series - Page 111

108
Parameter
Name
Description
Setting Range
Motor Poles
the motor nameplate.
Min.: 2
Max.: 48
t2-08
PM Motor Base
Speed
Sets the PM motor base speed according to the
motor nameplate.
Default∶
1750 rpm
Min.: 0 rpm
Max.: 24000 rpm
t2-09
PM Motor Rotor
Resistance
Sets the PM motor rotor resistance per phase
according to the motor nameplate.
Default: 0.000Ω
Min.: 0.000 Ω
Max.: 65.000 Ω
t2-10
PM Motor d-Axis
Inductance
Sets the PM motor d-axis inductance according to
the motor nameplate.
Default: 0.00 mH
Min.: 0.00 mH
Max.: 600.00 mH
t2-11
PM Motor q-Axis
Inductance
Sets the PM motor d-axis inductance according to
the motor nameplate.
Default: 0.00 mH
Min.: 0.00 mH
Max.: 600.00 mH
t2-12
Retain
t2-13
PM Motor Induced
Voltage Constant
(Ke)
Sets the PM motor induced voltage constant
according to the motor nameplate.
Default: 0.1
Min.: 0.1
Max.: 2000.0
t2-14
PM Motor
Auto-Tuning Current
Sets the amount of current for Auto-Tuning as a
percentage of the motor rated current. Increase
this value when inertia is high.
Default: 30%
Min.: 0%
Max.: 120%
t2-15
<7>
PG pulse number
when PM motor is
automatically
commissioned
Set the number of pulses per revolution of the PM
motor using PG (pulse generator, encoder).
Default: 2500 ppr
Min.: 1 ppr
Max.: 15000 ppr
t2-16
Retain
t2-17
PM Motor
Auto-Tuning Setting
0 : Disabled
1 : Enabled
Default∶ 0
Min.: 0
Max.: 1
t3:Retain
Group F, Option Settings
F1: PG Card Settings
F1-00
PG Pulse Number
Sets the number of pulses (pulse generator and
encoder) per resolution for PG.
Default: 1024 ppr
Min.: 1 ppr
Max.: 15000 ppr
F1-01
PG Rotation Setting
Selects the direction indicated by the PG pulses.
0 ∶ A pulse leads with Forward fun command.
1 ∶ B pulse leads with Forward fun command.
Default: Determined by
A1-02
Range: 0, 1