LiteOn EVO 8000 Series - Page 86

83
Parameter
Name
Description
Setting Range
d1-06
Middle Output
Frequency
When d1-01 ≦ E, parameters d1-02 to d1-11 can
be used to monitor the V/F pattern.
When d1-01 = F, parameters d1-02 to d1-11 can
be used to create a V/F pattern.
Default: <1>
Min.: 0.0 Hz
Max.: Defined by d1-02
d1-07
Middle Output
Frequency Voltage
Default: <1>
Min.: 0.0 V
Max.: 255.0 V <3>
d1-08
Minimum Output
Frequency
Default: <1>
Min.: 0.0 Hz
Max.: Defined by d1-02
d1-09
Minimum Output
Frequency Voltage
Default: <1>
Min.: 0.0 V
Max.: 255.0 V <3>
d1-10
Middle Output
Frequency 2
Default: 0.0 Hz
Min.: 0.0 Hz
Max.: Defined by d1-02
d1-11
Middle Output
Frequency Voltage 2
Default: 0.0 V
Min.: 0.0 V
Max.: 255.0 V <3>
d1-12
Motor 2 Control
Method Selection
0 ∶ Non PG Card Open-Loop V/F Control
Default: 0
d1-13
Motor 2 Maximum
Output Frequency
Sets the Motor 2 V/F pattern in d1-13 to d1-22.
Default: <1>
Min.: 25.0 Hz
Max.: 400.0 Hz
d1-14
Motor 2 Maximum
Voltage
Default: <1>
Min.: 0.0 V
Max.: 255.0 V <3>
d1-15
Motor 2 Base
Frequency
Default: <1>
Min.: 0.0 Hz
Max.: Defined by d1-13
d1-16
Motor 2 Base
Voltage
Default: <1>
Min.: 0.0 V
Max.: 255.0 V <3>
d1-17
Motor 2 Middle
Output Frequency
Default: <1>
Min.: 0.0 Hz
Max.: Defined by d1-13
d1-18
Motor 2 Middle
Output Frequency
Voltage
Default: <1>
Min.: 0.0 V
Max.: 255.0 V <3>
d1-19
Motor 2 Minimum
Output Frequency
Default: <1>
Min.: 0.0 Hz
Max.: Defined by d1-13