4 : Drive Ready
5 : Uv (Undervoltage) Detection
6 : During Baseblock
7 : Retain
8 : Frequency Command Source
9 : Frequency Command Loss
10: Run Command Source
11 : Fault
12 : Communication Mode
13 : Alarm
14 : Fault Restart
15 : Timer Output
16 : Frequency (FOUT) Detection 1
17 : Frequency (FOUT) Detection 2
18: Overvoltage/ Undervoltage Detection 1
(normal open)
20: Overvoltage/ Undervoltage Detection 2
(normal open)
22 : During Reverse
23: Motor 1/ 2 Selection
24: During Regeneration
25 : During Restart
26 : Motor Overload Pre-Alarm (oL1)
27 : Drive Overheat Pre-Alarm (oH)
28 : Retain
29 : Mechanical Weakening Detection (Normal
Open)
35: During Frequency Output
36: Drive Enabled
37: Watt Hour Pulse Output
38 : Local/Remote Mode
39 : During Speed Search
40 :PID Feedback Low
41 :PID Feedback High
42 : During KEB Operation
43 :Retain
44 : During Fast Stop
45 : Internal Cooling Fan Alarm
47 : The Traverce Function Up
48 : During Traverse
100 to 148: 0 to 48 with Inverse Output
To Next Page
Loading...